Front and back view of a SCHOTT ROBAX® Dry Wiper

SCHOTT ROBAX® Dry Wiper

As the centre of the home, the fireplace provides a focal point for tranquility and relaxation. To maintain a clear view of the flames and maximize the enjoyment of the fiew-viewing panel, regular cleaning is necessary. But frequent cleaning can also be very annoying and time-comsuming. The ROBAX® Dry Wiper makes cleaning a fireplace quick and easy, leaving no smears or scratches.

How to efficiently clean fire-viewing panels

Specially for cleaning non-coated fire-viewing panels, the ROBAX® Dry Wiper doesn’t require a cleaning agent or water. You simply wipe it across the sooty surface of the glass-ceramic panel once the fireplace is cold. Then tap out the Dry Wiper to remove soot and place it back in the package. Washing is neither necessary nor recommended.

As one of the leading specialists in glass-ceramic fire-viewing panels, SCHOTT understands the need for a quick and simple solution to sooty panels, allowing you to relax and enjoy the warmth of a real fire all over again.

Three ROBAX® Dry Wipers in their packaging
1/3

The Dry Wiper was developed by SCHOTT for cleaning fire-viewing panels

Man cleaning a sooty fire-viewing panel
2/3

Usage of the ROBAX® Dry Wiper offers a clear fire-viewing panel for a real fire experience

ROBAX®Dry Wiper cleaning soot off a fire-viewing glass panel
3/3

It is unnecessary to use water or a cleaning agent with the ROBAX® Dry Wiper

ROBAX® Dry Wiper advantages

The ROBAX® Dry Wiper offers a number of benefits for the quick and easy cleaning of fire-viewing panels.

Easy to use
Easy to use
Use the grey side to clean the panel. Afterwards, simply tab the ROBAX® Dry Wiper to remove the soot and return to its packaging.
No waste of water
No waste of water
Only use the ROBAX® Dry Wiper dry. Washing is neither necessary nor recommended.
Scratch-free
Scratch-free
Since the surface of the ROBAX® Dry Wiper is softer than the glass-ceramic, cleaning is completely scratch-free.
No rinsing
No rinsing
The ROBAX® Dry Wiper does not leave any streaks or smears, so no rinsing required.
No seal damage
No seal damage
As chemical cleaning agents are not necessary, the seal is not damaged during cleaning and therefore reliably retains its function.
Eco-friendly
Eco-friendly
No further chemical cleaning agents, sprays or clothes necessary.
Find out how the ROBAX® Dry Wiper offers quick and easy fireplace panel cleaning.

To protect your privacy, external content will only be loaded with your consent. Refer to our Cookie Policy for detailed information.

  • Find out how the ROBAX® Dry Wiper offers quick and easy fireplace panel cleaning.
  • Discover how to keep your fireplace viewing panel clean using the ROBAX® Dry Wiper.

A box of SCHOTT ROBAX® Dry Wipers

How to order

ROBAX® Dry Wipers are available to order directly from SCHOTT or from your local distributor. If directly ordering from SCHOTT, the minimum order quantity is one pallet, which includes 1,008 Dry Wipers in boxes of 14. Lower quantities are available from your local distributor below.

Show all partners of supply

FAQ

Thanks to its special shape, the ROBAX® Dry Wiper is easier to grip, making it simpler to clean the fire-viewing panel. The special mixture of stainless-steel mesh makes the cleaning of the fire-viewing panel effective but gentle to the surface at the same time.

Use the grey side to clean the panel.

Only use the ROBAX® Dry Wiper dry. Washing is neither necessary nor recommended. After using the Dry Wiper, simply tab it to remove the soot. 

The ROBAX® Dry Wiper does wear over time. Depending on the intensity of use it should last at least one heating season. As soon as the grey side starts to become frayed, please use a new ROBAX® Dry Wiper.

It is important to clean the panel regularly, even if it is only slightly polluted. Therefore, we recommend cleaning the panel before lighting the fireplace, but at least twice a week if the fireplace is used every day. Fire-viewing panels should only be cleaned after they have cooled down. We recommend the ROBAX® Dry Wiper (for uncoated ROBAX® panels).

For the coated surface of panels with a coating (e.g. ROBAX® TrueView, ROBAX® Mirror, ROBAX® IR Max, ROBAX® IR SuperMax) we recommend standard window glass cleaner and a soft cloth. Please do not use the ROBAX® Dry Wiper on a coated surface of the fire-viewing panel as it can destroy the coating.

Want to know more? Let’s talk

Whether you need more information, samples, a quote, or advice for a project, I would be delighted to talk to you.

Contact us
Photo Birgit Eickeler Nov 2021.jpg
Birgit Eickeler

Product Manager SCHOTT ROBAX®