Coatings and tinted panels

Up to 35 % of the heat radiation is reflected back into the combustion chamber. The result: the energy radiation passing through the panel is reduced and the temperature in the combustion chamber is significantly increased. The extra energy gained can be used for more efficient heating water conduits or as additional stored energy.

The higher temperatures in the combustion chamber generally causes better combustion and results in lower emission values.

Even when the heat runs high, ROBAX^® Energy Plus is resistant to high temperatures. The temperature resistance is approximately 650 °C (1,202 °F). The efficiency of the coating is therefore maintained over time.

The coating can result in less soiling on the panel, in particular due to soot, which makes cleaning the glass-ceramic distinctly easier.

The reduced radiation means that the installation area is heated more pleasantly and evenly. Moreover, the floor temperature in front of the heating appliance remains cooler. This means that furniture can be placed closer to the visible area of the appliance, thus offering increased enjoyment of the fire experience.

The SCHOTT application technology laboratory guarantees comprehensive application servicing.

* All the above effects are of course heavily dependent on the construction of the individual stove and its normal usage. We strongly recommend that you check whether ROBAX^® Energy Plus delivers the results you are looking for before you opt for a standard model.

ROBAX^® IR Max is the next generation of heat reflection. The reflection of infrared (IR) radiation back into the combustion chamber remains constant over the combustion period of the fireplace.

Seven times higher heat reflection than with a non-coated fire viewing panel:
 

• Reflects up to two times more heat radiation back into the combustion chamber than the previous product, ROBAX^® Energy Plus
• Significantly elevated temperature in the combustion chamber
• Simultaneous reduction of the temperature outside of the combustion chamber therefore making the living room comfortably warm and not too hot*

Advantages

 

• The lower heat radiation emitted, especially with large fire viewing panels ensures a constantly pleasant room temperature
• Constant performance of the coating over the entire burning period
• The coating does not distort the view of the fire.
• As a result of the heat reflection into the combustion chamber and the associated high temperatures of the combustion process, soot deposits on the fire viewing panels can be reduced
  or do not occur at all. This means less cleaning and an unobstructed view of the fire.
• By the reflection of the heat radiation, the available heat energy can be used more efficiently and more sustainably, e.g. for water-bearing fireplaces or as additional storage energy. This means
  that in the ideal scenario, heating costs can be reduced.
• Higher combustion temperatures can contribute to the reduction of emissions.
• More design possibilities, especially with regard to fireplaces with side glazing and large fire viewing panels

Both the embers and the fire in a fireplace emit heat/infrared radiation (typical wavelengths from 800 to 10,000 nm). ROBAX^® IR Max reflects seven times more than a non-coated ROBAX^® fire viewing panel. The wavelength range in the evaluation was from 800 to 8,000 nm of the reflection spectra. Conditions and equipment remained constant throughout the testing process.
 

The anti-reflective coating applied on both sides of the glass is available for flat ROBAX^® fire viewing panels. It helps to avoid reflections from the area surrounding the fireplace and, thus, facilitates the best possible view of the heart of the fireplace. We recommend using ROBAX^® TrueView only with gas devices.

ROBAX^® Magic glass-ceramic panels have thermal, physical and chemical characteristics, which make them suitable for use as highly resistant interior paneling for gas fireplaces. Impressions of dancing flames surround the fire chamber and a feeling of coziness fills the room.

ROBAX^® Magic is available in black with a variety of surface textures and can be shaped for a perfect fit and for a unique design perspective.
 

• Decorative glass-ceramic for interior paneling
• Various surface structures
• No discoloration compared to enamel
• Brilliant reflections
• High-end, contemporary look
• Fire appears larger, chamber looks deeper

LATEST INNOVATION: ROBAX^® Magic black now also available as curved panel

Temperature/time loading
 
The values listed in the table to the left are relevant for the practical use of glass-ceramic as inner lining for gas stoves and fireplaces.

Consult with a SCHOTT representative on your idea and required specifications.

Thanks to their thermal, physical and chemical characteristics, ROBAX^® Ambience glass-ceramic panels are intended as durable outer linings for stoves and fireplaces in private homes. ROBAX^® Ambience opens new and large-area design options for enhancing and beautifying room heating devices that may require low thermal expansion and high temperature resistance.

ROBAX^® Ambience can be custom-decorated with a large selection of ceramic colors. The material colors of ROBAX^® Ambience are black, grey, white and translucent white. The surfaces of ROBAX^® Ambience are smooth on one side and smooth or nubbed on the other side.

ROBAX^® Mirror: This reflective layer is only offered for flat ROBAX^® fire viewing panels. When no fire is burning, the reflective pane prevents the often dirty inside of the fireplace from being viewed to a large extent. When a fire is burning, however, viewing is excellent. The reflective layer is found on the side that faces away from the fire. The uncoated side is indicated for purposes of installation.