Standard forms of delivery

Flat cut-to-size panels Bent panels

The current status of availability by material and form of delivery has to be requested by the customer. Not all combinations are producible. Other forms of delivery are available on request.

General appearance

Transparent, translucent white, translucent bluegrey, opaque white, opaque grey, tinted.
One-sided nubs are available on request.

The surface texture depends on the thickness.
Polishing process provides “window glass” appearance.
Decoration is available on request.

Overview of dimensions: Cut-to-size panels

	Standard length	Standard width	Profile
Thickness	Min. - Max.	Min. - Max.
2 mm	50–1,555 mm	50–860 mm	On request
3 mm	50–1,930 mm	50–1,075 mm	C, U, V
4 mm	50–1,930 mm	50–1,075 mm	C, U, V
5 mm	50–1,930 mm	50–1,075 mm	C, U, V
6 mm	50–1,930 mm	50–1,060 mm	C, U, V
≥ 8 mm	50–on request	50–960 mm	C, U, V

Forms of delivery

Grinding profiles

Dimensional tolerances and material defects

With regard to the specific format all of the following characteristics refer to the net-size, as agreed upon with the customer. Other forms of delivery are available on request.

Dimensional tolerances of flat cut-to-size panels

Characteristics / Areas / Location	Tolerance
Thickness t
t = 2.0 mm t = 3.0 / 4.0 / 5.0 mm t = 6.0 mm	± 0.3 mm ± 0.2 mm ± 0.3 mm
Edge length l
l ≤ 500 mm l > 500 mm	± 1.0 mm ± 1.5 mm
Squareness (ISO 1101) (depending to the edge length l)
l ≤ 500 mm l > 500 mm	≤ 1.0 mm ≤ 1.5 mm
Flatness along the diagonal D (depending on edge length l)
on request
Corner radius r
r ≤ 5 mm r ≤ 20 mm r > 20 mm	± 0.5 mm ± 1.0 mm ± 2.0 mm
Drilled holes
Diameter of drilled holes Borehole position to reference	± 0.5 mm ± 1.5 mm

Dimensional tolerances

Further data and information available on request.

News

01.

April

News SCHOTT ROBAX® und NEXTREMA® unter neuer Leitung

weitere News