Battery Cut-Off Housings

Product Description

In some vehicles, the battery is not located in the engine compartment, but rather in the rear of the vehicle near the fuel tank. In the event of a crash, the flow of current from the battery must be stopped immediately to prevent the fuel in the fuel tank from igniting. This can be achieved with a “cut-off” system, which isolates two contacts from one another with the ignition of a small charge.

The operating principle employed in battery cut-off systems is similar to that used in airbag ignitors.

Advantages

The materials used in the battery cut-off housings are highly resistant to the environmental conditions prevailing in the rear of a vehicle. The materials used and specifications for battery cut-off systems can be adapted to customer requirements.

Applications

Battery cut-off housings and feedthroughs made with glass-to-metal sealing are suitable for all applications that require reliable, long-term transmission of an electrical signal for the ignition of hermetically sealed explosive loads. Other areas of applications include airbag ignitors.

Technical Details

Technology

To ensure the reliable hermeticity of battery cut-off housing components, glass-to-metal sealing technology is used. Please click on this page for more information.

The type of glass and metal used differs, depending on customer requirements and the type of feedthrough required. Very often, battery cut-off systema feedthroughs are produced using steel and stainless steel due to their high resistance to corrosion. In addition nickel and/or gold plating in compliance with the latest automotive industry standards are applied.

Features / Specifications

Our products are all custom-made. Please contact your local salesperson for more information about SCHOTT battery cut-off housings and feedthroughs.


Forms of Supply and Product Packaging

All products can be packaged individually and supplied on trays.

Quality

All our Automotive Division production facilities are TS 16949 certified. For more information, please refer to our quality assurance processes.
Trade Fairs & Events
25.
September
Trade fair Automotive LiDAR 2019, Detroit, MI, USA, 25.09 - 26.09.2019
01.
October
Trade fair European Microwave Week 2019, Paris, France, 01.10 - 03.10.2019
Contact
contact-home.png
SCHOTT AG
Christoph-Dorner-Strasse 29
84028 Landshut
Germany
contact-phone.png
E-Mail to SCHOTT+49 (0)871/826-0
SCHOTT uses Cookies on this Website to enhance the user experience and provide the best possible Service. By continuing to browse the Website, you consent to our use of Cookies.