Browse through our press and news section by category:

27.10.2015, Singapore & Landshut (Germany)

Real Dual Seal for Double Safety

Double-sealed SCHOTT Eternaloc® terminal headers offer two truly independent pressure barriers in a compact design.
In the LNG industry, submerged cryogenic appliances with high safety requirements call for cable feedthroughs with a second pressure barrier. At Gastech EXPO in Singapore, SCHOTT will be presenting the advantages of its double-sealed Eternaloc® terminal headers (October 27-30, 2015; Booth D238). Equipped with two hermetically and electrically connected, yet mechanically decoupled glass-to-metal seals, they truly provide the additional pressure barrier to meet the highest safety requirements. In addition, SCHOTT Eternaloc® dual seals come in designs that are much more compact and reduced in weight compared to other market solutions.

Reliable terminal headers are needed to safely transmit electrical power and signals for the LNG pumps, compressors and turbine expanders, which operate in the cryogenic pressure vessel. The headers have to be resilient enough to withstand extreme temperature shifts while remaining reliably gas- and pressure-tight.
Because terminal headers are so critical to safety, most cryo-applications – especially those that operate under high pressure – require a redundant electrical and mechanical sealing to maintain the pressure integrity even if one of the seals would fail. This means that the two pressure barriers need to be hermetically and electrically connected, yet mechanically decoupled from the other.

In other set-ups, two single barrier feedthroughs that are integrated into a pipe are internally connected to achieve a so-called double seal. However, this is a rather space-consuming solution. In contrast, SCHOTT has developed far more compact designs that are equipped with two hermetically connected, but completely separate glass-to-metal sealed pressure barriers.

A more compact double seal design

“Our double-sealed Eternaloc® terminal headers are designed to combine superior safety with compactness”, says Thomas Goettlinger, Sales Director LNG at SCHOTT Electronic Packaging. The glass is melted to the conductor and the flange over the entire length of the pressure-proof seal. Yet, the glass does not protrude the flange, which enables such a compact design. Eternaloc® feedthroughs have fewer parts, less joints to be sealed and a dramatically reduced weight and size. This is an especially relevant aspect once space and weight are restricted, for example in off-shore applications.

Maintenance-free safety

Besides being a great dielectric isolator, glass is a very reliable sealing material. In contrast to ceramics, glass melts directly to metal. No brazing or welding is required that often tends to corrode in harsh environments and may show fissures over time. As opposed to epoxy, glass is inorganic and therefore non-aging, which means maintenance-free performance over a virtually unlimited service-time.
In double-sealed Eternaloc® feedthroughs, the hermetic space in between the two seals furthermore offers the possibility of nitrogen purging for periodic or permanent leakage monitoring as well as inertisation of both pressure barriers. If not required, the inner chamber can also be closed and certified as a flameproof enclosure.

More information can be found here: www.schott.com/lng 

Eternaloc® is a registered trademark of SCHOTT AG.

SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. The company has more than 130 years of outstanding development, materials and technology expertise and offers a broad portfolio of high-quality products. SCHOTT is an innovative enabler for many industries, including the home appliance, pharmaceutical, electronics, optics, automotive and aviation industries. SCHOTT strives to play an important part of everyone’s life and is committed to innovation and sustainable success. The group maintains a global presence with production sites and sales offices in 35 countries. With its workforce of approximately 15,400 employees, sales of 1.87 billion euros were generated in fiscal year 2013/2014. The parent company, SCHOTT AG, has its headquarters in Mainz (Germany) and is solely owned by the Carl Zeiss Foundation. As a foundation company, SCHOTT assumes special responsibility for its employees, society and the environment. www.schott.com 
Press contact
SCHOTT AG
Michael Müller
Public Relations Manager
Hattenbergstraße 10
55122 Mainz
GER
Phone: +49 6131/66-4088
Further information
SCHOTT AG
Salvatore Ruggiero
Vice President Marketing and Communication
Hattenbergstraße 10
55122 Mainz
GER
Phone: +49 6131/66-4140
SCHOTT uses Cookies on this Website to enhance the user experience and provide the best possible Service. By continuing to browse the Website, you consent to our use of Cookies.

Dear visitor,

we’d like to invite you to participate in our survey regarding the usability of our web presence. Your feedback is important to us and will help us to further improve our information offer.

Please take the opportunity to share your opinion with us. It will only take 5 min of your time.

Thank you very much!
Your SCHOTT Online Team