Products Ordering Information Application Support News About us
|
Accessories for NEXTERION® products
To make full use of the NEXTERION® slide products we have added a range of useful accessories.
|
Multi-well Incubation Chambers
|
The use of re-usable incubation chambers is recommended for carrying out the post-printing binding reactions.
NEXTERION® IC-16 (order code: 1262705)
NEXTERION® IC-96 (order code: 1272375)
These are a reusable multi-well incubation chambers consisting of a flexible, black silicon superstructure held within a high quality, black anodized aluminium holder . The silicone superstructure is tightly held against the glass slide surface by two aluminium plates to create a leak-proof seal around each well. The press-fit silicone superstructure eliminates the need for adhesives that are autofluorescent, and can increase background signal of the slide coating.
The NEXTERION® incubation chambers are ideal for use with multi-channel pipettes or automated liquid handling systems. The chambers are designed to be re-usable, replaceable superstructures are available to maximise the usable life.
Note: The 16-well superstructure is asymmetric, so for the correct orientation, ensure that the wider well wall side of the superstructure is fitted into the upper plate, and the thinner portion is against the glass slide surface.
The NEXTERION® IC-96 will only fit glass plates that have the dimensions 110.0 x 74.0 mm. With care, it is possible to remove the dividing well walls of the superstructure, so that the IC-96 may also be used with the single pad of the NC-C/N plates.
Please note: The NEXTERION® IC-96 incubation chamber cannot be scanned in the Sensovation CLAIR® and FLAIR® colorimetric and fluorescent imaging readers.
|
|
NEXTERION® IC-16
|
|
NEXTERION® IC-96
|
NEXTERION® IC-16s (order code: 1262706)
NEXTERION® IC-96s (order code: 1293526)
Replacement superstructure for both incubation chambers can be ordered separately.
|
|
Superstructure for NEXTERION® IC 16
|
This short video shows how easy it is to use the NEXTERION® incubation chambers.
|
Cleaning Protocol IC-16 and IC-16s
|
Cleaning Protocol NEXTERION®IC-16/IC-16s
NEXTERION® Slide Holder
|
NEXTERION® MPX-4 tray (order code: 1180496)
The NEXTERION® MPX-4 tray is designed to hold up to four NEXTERION® slides. The tray allows the use of liquid dispensing systems, or multi-channel hand-held pipettes. The external dimensions of the MPX-4 tray are SBS microplate sized allowing the high throughput processing of up to 64 arrays simultaneously.
|
|
NEXTERION® MPX-4 tray
|
|
Dimensions NEXTERION® MPX-4 tray
|
|
|
SCHOTT Careers
SCHOTT Careers